Technical Data Sheets

Search Technical Data Sheets


	Technical Data Sheet

1 mil rubber based adhesive, self wound on a silicone liner

TDS No. BA-140

Effective Date: 19-Apr-2011

Description:

GENERAL

Material Type: Self-Wound, unsupported adhesive

Adhesive: Permanent Rubber based adhesive

APPLICATIONS

BA-140 adhesive provides good bonding to a wide variety of substrates along with moderate temperature performance and good chemical resistance.

Brady BA-140 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

Brady BA-140 is Halogen compliant.

Brady BA-140 adhesive is FDA approved

Details:

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Thickness

ASTM D 1000

- Liner

-Adhesive

0.002 inch (0.0508 mm)

0.001 inch (0.0254 mm)

To perform the following tests, the exposed adhesive is laminated to a 2 mil polyester film.

Adhesion samples are dwelled on panel, for the indicated time period.

Release from liner, g/in

-Easy Side

-Tight Side

ASTM D1000

72 hour dwell

5 g/in

10 g/in

Adhesion to:

-Stainless Steel

-Polypropylene

-Polycarbonate

ASTM D 1000

20 minute dwell
72 hour dwell

92 oz/in (25.2N/25 mm)
101 oz/in (27.6 N/25 mm)

50 oz/in (13.7 N/25 mm)
47 oz/in (12.8 N/25 mm)

82 oz/in (22.4 N/25 mm)
99 oz/in (27.0 N/25 mm)

Tack

ASTM D 2979
Polyken™ Probe Tack
1 second dwell

60 oz (500g)

SAFT

Shear Adhesion Failure Temperature°C

ASTM D4498-95

(25mm x 25mm x 1Kg)

102°C (215.6°F)

Trademarks:
ASTM: American Society for Testing and Materials (U.S.A.)
Polyken™ is a trademark of Testing Machines Inc.
S. I.: International System of Units

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Coated Products | P.O. Box 298 | Milwaukee, WI 53201-0298 | USA | Tel: 800.662.1191 | Fax: 414.228.5998

Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.